Silverado 1500 2WD V8-6.0L (2010)
4. Use J 44247 to seat the retaining feet on transmission connector (1).
5. Install the oil pan and transmission internal oil filter. Refer to Oil Pan Replacement ().
6. Connect the external wiring harness to the main transmission connector.
Note: The FastLearn, adapt, procedure must be performed. This can be done in 1 step using a scan tool. If this procedure is not done, the TCM
adaptive values will be at the settings that it learned for the old components and will be in slow adaptive mode. Under these conditions, it will take
an unacceptably long time for the adaptive values to converge to levels suitable for the new transmission.
7. Perform the FastLearn procedure. Refer to FastLearn Procedure ().
