Silverado 1500 2WD V8-6.0L (2010)
4. If equipped with a 4.8L or 6.0L engine, tighten the clutch pressure plate bolts in the sequence shown.
Tighten the bolts to 70 Nm (52 lb ft).
5. Remove the J 5824-A .
6. Install the transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Tremec 5-Speed (TZ0) - Manual Transmission/Transmission Replacement).
