Silverado 1500 2WD V8-6.0L (2010)
Differential Output Shaft Bearing: Adjustments
Inner Axle Shaft Shim Adjustment
Special Tools
*
J 34672 Depth Micrometer
*
J 34673 Flat Gauge Bar
*
J 8001 Dial Indicator Set
The front drive axle clutch gear shim needs to be measured and adjusted if any of the following parts are replaced:
*
The inner axle shaft
*
The inner axle shaft housing
*
The clutch shaft
*
The differential carrier case
*
The ring and pinion gears
*
The differential assembly
*
The differential bearings
*
The carrier connector
Front drive axle clutch shims are available in the following sizes:
1. Install the inner axle bearing and the inner axle seal, if necessary. Refer to Front Drive Axle Inner Shaft Seal and Inner Shaft Bearing Replacement
().