Silverado 1500 2WD V8-6.0L Hybrid (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
2. Install the adjustable pedal position sensor bolts (1) and tighten to 2 Nm (18 lb in) .
3. Connect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Install the driver knee bolster. Refer to Knee Bolster Replacement (With RPO SLT) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair)Knee Bolster Replacement (Without RPO SLT) (See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair) .
