Silverado 1500 2WD V8-6.0L Hybrid (2009)
1. Install the door upper striker (4).
2. Install the spacer, if equipped.
3. Install the door upper striker bolt (3).
4. If the striker backing plate has moved, rotate the lower striker bolt until the upper threaded hole is properly aligned.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
5. Tighten the upper striker bolts.
Tighten the door upper striker bolts to 24 Nm (18 lb ft).
6. Install the upper trim door upper striker cover.
Ensure that the retainer clips were Not damaged when removed. Push upward into locator holes.
