Silverado 1500 2WD V8-6.0L Hybrid (2009)
1. Position the sunroof motor/actuator (3) to the sunroof module.
2. Push the sunroof motor/actuator straight upward to engage the drive gear between the cables housed within the sunroof cable drive tubes.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
3. Install the sunroof motor/actuator screws (2) to the sunroof actuator.
Tighten the screws to 4 Nm (35 lb in).
4. Connect the electrical connector (1) to the sunroof motor/actuator .
5. Install the headliner. Refer to Headlining Trim Panel Replacement (Crew Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair
)Headlining Trim Panel Replacement (Extended Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair)Headlining Trim Panel
Replacement (Regular Cab) (See: Interior Moulding / Trim/Headliner/Service and Repair) .
6. Initialize/teach the sunroof motor/actuator . Refer to Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab Existing Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab New Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab Existing Motor) (See:
Testing and Inspection/Programming and Relearning)Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab New Motor) (See: Testing
and Inspection/Programming and Relearning) .
7. Inspect the sunroof for proper operation.
8. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) for programming and setup information.
