Silverado 1500 2WD V8-6.0L Hybrid (2009)
6. Position a piece of wood across the piston to be installed.
7. Applying equal pressure by hand while pushing down, install the piston in the bore.
8. Remove the piece of wood.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
9. Install the bleeder valve in the brake caliper housing.
Tighten the bleeder valve to 12 Nm (106 lb in).
10. Install the bleeder valve cap.
11. Install the brake caliper. Refer to Rear Brake Caliper Replacement (JD9) (See: Removal and Replacement/Rear Brake Caliper Replacement
(JD9))Rear Brake Caliper Replacement (JH6, JH7) (See: Removal and Replacement/Rear Brake Caliper Replacement (JH6, JH7)) .
