Silverado 1500 2WD V8-6.0L Hybrid (2009)
Note
The crankshaft balancer is balanced as an individual component. It is not necessary to mark the balancer prior to removal.
6. Use the J 41816-A and the J 41816-2 to remove the crankshaft balancer (138).
7. Remove the J 41816-A and the J 41816-2 from the crankshaft balancer.
Installation Procedure
Note
*
The crankshaft balancer installation and bolt tightening involves a four stage tightening process. The first pass ensures that the balancer is installed
completely onto the crankshaft. The second, third, and fourth passes tighten the NEW bolt to the proper torque.
*
The used crankshaft balancer bolt will be used ONLY during the first pass of the balancer installation procedure. Install a NEW bolt and tighten as
described in the second, third and fourth passes of the balancer bolt tightening procedure.
