Silverado 1500 2WD V8-6.0L Hybrid (2009)
18. Install the intake manifold (500).
19. Apply a 5 mm (0.20 in) band of threadlock GM P/N 12345382 (Canadian P/N 10953489) to the threads of the intake manifold bolts (512). Refer
to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and Sealers) .
Note
The aid of an assistant may be helpful in holding the engine harness up out of the way so the upper intake manifold cover does not get caught against the
engine harness.
20. Install the intake manifold bolts (512) finger tight.
21. Tighten the intake manifold bolts to specifications.
*
Tighten the bolts a first pass in the sequence shown to 5 Nm (44 lb in).
*
Tighten the bolts a final pass in the sequence shown to 10 Nm (89 lb in).