Silverado 1500 2WD V8-6.0L Hybrid (2009)
Canister Vent Valve: Service and Repair
Evaporative Emission Canister Vent Solenoid Valve Replacement (Front of Tank)
Evaporative Emission Canister Vent Solenoid Valve Replacement (Front of Tank)
Removal Procedure
Note
Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the fittings in order to avoid possible system
contamination.
1. Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Cut the canister vent solenoid hose (1) approximately 76 mm (3 in) from the evaporative emission canister vent solenoid (2).
3. Pull back on the retaining tab (1) and release the vent solenoid valve (2).