Silverado 1500 2WD V8-6.0L Hybrid (2009)
Push down firmly on both sides of the rail until all injectors have been seated into their bores.
8. Install the fuel rail bolts.
Tighten the bolts to 10 Nm (89 lb in).
9. Install the EVAP tube and purge solenoid.
10. Install the EVAP canister purge solenoid to the fuel rail bracket and engage the retainer.
11. Connect the chassis EVAP tube quick connect fitting at the EVAP canister purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service
(See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
12. Connect the EVAP tube quick connect fitting at the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
13. Connect the chassis fuel feed pipe (2) quick connect fitting to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service) .
