Silverado 1500 2WD V8-6.0L Hybrid (2009)
1. Install the appropriate mega fuse (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
2. Install the upper mega fuse nut (1), if necessary.
Tighten the nut to 15 Nm (11 lb ft).
3. Install the auxiliary battery positive cable to the fuse studs.
4. Install the generator battery jumper cable terminal (2) to the fuse stud.
5. Install the generator battery jumper cable to fuse nut (3).
Tighten the nut to 9 Nm (80 lb in).
6. Install the auxiliary battery positive cable nut (1) to the mega fuse holder.
Tighten the nut to 15 Nm (11 lb ft).
