Silverado 1500 2WD V8-6.0L Hybrid (2009)
Note
Ensure that the reference marks are aligned before installing the propeller shaft.
4. Align the reference marks on the propeller shaft (1), universal bearing cap (4), pinion flange (5), and the rear axle housing (6).
5. With the reference marks aligned, install the propeller shaft (1) on the rear axle (6).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
6. Install the rear propeller shaft bolts (3) and the strap (2).
Tighten the yoke retainer bolts to 25 Nm (18 lb ft).
7. Remove the support and lower the vehicle.
