Silverado 1500 2WD V8-6.0L Hybrid (2009)
Caution: When removing the propeller shaft, do not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke
and the universal joint. If the propeller shaft is removed by using such means, the injection joints may fracture and lead to premature failure of the
joint.
5. Remove the rear propeller shaft from the rear axle and the center support bearing.
Note
Step 6 is for those vehicles that have a slip yoke from the transmission from transfer case to the propeller shaft.
6. Reference mark the transmission or the transfer case (1), propeller shaft slip yoke (2), universal bearing cap (3), and the propeller shaft (4).
Note
Step 7 is for those vehicles that have the yoke attached to the output shaft.
