Silverado 1500 2WD V8-6.0L Hybrid (2009)
7. Reference mark the transmission or transfer case (1), output shaft flange (2), universal joint bearing cap (3), and the propeller shaft.
8. Remove the center bearing support nuts (1).
9. Remove the center bearing support (2).
Note
For those vehicles equipped with the yoke attached to the output shaft, proceed to step 10. Those vehicles equipped with a slip yoke, proceed to step 12.
10. For vehicles equipped with the yoke attached to the output shaft, use a suitable jack stand support the propeller shaft until propeller shaft is to be
removed.
11. Remove the propeller shaft bolts (3), the straps (4), and the propeller shaft (2) from the transmission or the transfer case (1).
