Silverado 1500 2WD V8-6.0L Hybrid (2009)
3. Align the reference marks on the transmission or the transfer case (1), output shaft yoke (2), and the propeller shaft (6).
Note
When installing the propeller shaft bolts, hand tighten the bolts. DO NOT tighten them to specification until the center bearing support bolts have been
installed and torqued to specifications.
4. Install the propeller shaft (2), the straps (3), the propeller shaft bolts (3) on the transmission or the transfer case (1).
5. Position the center support bearing (1) on the frame.