chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Burnishing Pads and Rotors|Page 7190 > < Burnishing Pads and Rotors|Page 7188
Page 16
background image

13. Lower vehicle. 
14. Adjust park brake cable. Refer to Park Brake Adjustment.

(15 Series W/NYS)

Disc Brake Backing Plate Replacement - Rear (15 Series W/NYS)

Caution:  Refer to Brake Dust Caution in Service Precautions.

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer Vehicle Lifting
3. Remove the tire and wheel assembly. 

4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar.

5. Remove the rear park brake bracket bolt.

Burnishing Pads and Rotors|Page 7190 > < Burnishing Pads and Rotors|Page 7188