Silverado 1500 2WD V8-6.0L VIN U (2004)
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install the bracket (3) to the rear of the pump (1).
^
Tighten the rear bracket retaining nuts to 50 Nm (37 ft. lbs.).
2. Install the power steering pump.
3. Install the bolt retaining the rear bracket to the engine.
^
Tighten the rear power steering bracket bolt to engine bracket to 50 Nm (37 ft. lbs.).
4. Install the bolts to the front of the pump.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the power steering pump return hoses (2,4) to the power steering pump and install the retaining clamps.
6. Raise the vehicle. Refer to Vehicle Lifting.
