Silverado 1500 2WD V8-6.0L VIN U (2004)
5. Install the power steering pump return hoses (1, 5) to the power steering pump.
6. Install the clamps retaining the power steering return hoses to the power steering pump.
7. Important:
Ensure that the hose contacts the power steering pump as shown.
Install the power steering pump pressure hose to the power steering pump.
^
Tighten the power steering pump pressure hose to 32 Nm (24 ft. lbs.).
8. Important:
The power steering system on this vehicle does not use standard power steering fluid. Refer to Fluid and Lubricant Recommendations for the
correct power steering fluid.
Fill and bleed the power steering system. Refer to Bleeding the Power Steering System.
9. Clean up any spilled power steering fluid from the hoses, connectors or pump.
10. Connect the energy storage box after servicing the vehicle.
