Silverado 1500 2WD V8-6.0L VIN U (2004)
1. Install the outer pinion bearing cup using the J 8611-01 , 8.6 inch axle, or the J 7818, 9.5 inch axle, or the J 8608 (11.5 inch axle) (2) and the J
8092 (1).
2. Install the inner pinion bearing cup using the J 45900, 8.6 inch axle, or the J 22306, 9.5 inch axle, or the J 44417, 11.5 inch axle (2) and the J 8092
(1).
3. Determine the selective shim thickness for the pinion.
4. Install the selective shim between the inner pinion bearing and the shoulder on the gear.
5. Install the inner pinion bearing using the J 24433, 8.6 inch axle, or the J 36614, 9.5 inch axle, or the J 44412, 11.5 inch axle. Press the bearing on
until the cone seats on the pinion shim.
6. Install a new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Use the proper fluid.
8. Install the outer pinion bearing into the axle housing.