Silverado 1500 4WD V8-5.3L (2007)
6.
Remove 100 mm (3.9 in) of harness tape, starting from the back of the connector, to make the repair.
7.
Locate and remove the 240 circuit (red wire with white stripe) (1) from cavity E2.
8.
Cut off the terminal.
9.
Locate circuit 3040 (red wire with a white stripe) (2) located in cavity D1 of connector X1 and cut the 240 and 3040 wires 75 mm (3 in) from the
back of the connector. Strip the ends of the wires.
