Silverado 1500 4WD V8-5.3L (2007)
8. Install the following parts onto the steering column shaft assembly:
1. Lubricate the steering shaft upper bearing inner race (1) with GM P/N 12345718 (Canadian P/N 10953516).
2. The steering shaft upper bearing inner race (1)
3. The steering shaft upper bearing inner race seat (2)
4. The steering shaft upper bearing spring (3)
5. Lubricate the turn signal switch cancel cam (4) with GM P/N 12377900 (Canadian P/N 10953529).
6. The turn signal switch cancel cam (4)
7. The turn signal switch cancel cam position plate (5)
9. Install the new steering shaft lock plate retaining ring onto the steering shaft using compressor J 23653-SIR and adapter J 42137.
10. Install the automatic transmission control assembly.
11. Install the tilt spring.
12. Install the ignition lock cylinder case.
13. Install the turn signal multifunction switch.
14. Install the inflatable restraint steering wheel module coil.
15. Install the steering column.