Silverado 1500 4WD V8-5.3L VIN B (2005)
Harmonic Balancer - Crankshaft Pulley: Specifications
Tighten the USED crankshaft balancer bolt ........................................................................................................................................ 330 Nm (240 ft. lbs.)
Remove the used crankshaft balancer bolt.
Important: The nose of the crankshaft should be recessed 2.4 - 4.48 mm (0.094 - 0.176 inch) into the balancer bore.
Install a NEW crankshaft balancer bolt.
Tighten the bolt a first pass ................................................................................................................................................................... 50 Nm (37 ft. lbs.)
Tighten the bolt a second pass ................................................................................................................................................. 140 degrees using J45059.
