chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Handle Bezel Replacement - Inside|Page 19105 > < Handle Bezel Replacement - Inside|Page 19103
Page 4
background image

1. Position the lower retainer to the trim panel.
2. Align the upper retainer clips to the door frame.
3. Press inward on the upper extension until the clips fully engage securing the panel to the door.

Water Deflector Replacement - Rear Door (Crew Cab)

Water Deflector Replacement - Rear Door (Crew Cab)

Removal Procedure

1. Remove the trim panel.

2. Using a flat-bladed tool, separate the bond between the sealer and the door.
3. Pull the waterproof sealing tape from the deflector.
4. Remove the water deflector.

Installation Procedure

1. Position the electrical connectors through the water deflector.
2. Using waterproof tape, or 3M(R) 777, or equivalent, install the water deflector to the door.
3. Install the trim panel to the door.

Water Deflector Replacement - Side Access

Water Deflector Replacement - Side Access

Removal Procedure

Important:  Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive between the
deflector and the door secures the deflector.

1. Remove the trim panel.

Handle Bezel Replacement - Inside|Page 19105 > < Handle Bezel Replacement - Inside|Page 19103