Silverado 1500 4WD V8-5.3L VIN B HO (2006)
5. For 15 series vehicles, install the equalizer and the nut to the threaded end of the intermediate cable.
Tighten the nut to 3.5 Nm (31 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
6. For 25/35 series vehicles, enable the park brake cable automatic adjuster.
7. Remove the safety stands and lower the vehicle.
8. Adjust the park brake system.
w/Rear Drum
Park Brake Cable Replacement - Intermediate (w/Rear Drum)
Removal Procedure
1. Ensure that the park brake is released.
2. Raise and support the vehicle.
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the park brake cables (2, 3) from the equalizer bar.
