chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Replacement - Front|Page 13952 > < Replacement - Front|Page 13950
Page 12
background image

8. For all 15 series vehicles, pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.

10. Remove the safety stands and lower the vehicle.
11. Adjust the park brake cable. Refer to Park Brake Adjustment (w/Rear Disc) Park Brake Adjustment (w/Rear Drum).

w/Rear Drum

Park Brake Cable Replacement - Right Rear (Drum Brakes)

Tools Required

J 37043 Parking Brake Cable Release Tool

Removal Procedure

Caution:  Refer to Brake Dust Caution.
Caution:  Refer to Brake Fluid Irritant Caution.

1. Ensure that the park brake is released.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
4. Remove the right park brake cable (2) from the equalizer.

Replacement - Front|Page 13952 > < Replacement - Front|Page 13950