chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Fuel Injector Balance Test With Special Tool|Page 8642 > < Fuel Injector Balance Test With Special Tool|Page 8640
Page 3
background image

Step 6 - Step 8

The number below refers to the step number on the diagnostic table.
6. If the pressure drop value for each fuel injector is within 10 kPa (1.5 psi) of the average pressure drop value, the fuel injectors are flowing

properly. Calculate the pressure drop value for each fuel injector by subtracting the second pressure reading from the first pressure reading. Refer
to the illustration.

Fuel Injector Balance Test With Special Tool|Page 8642 > < Fuel Injector Balance Test With Special Tool|Page 8640