Front Suspension Stabilizer Bushing Service and Repair
Stabilizer Bushing: Service and Repair
Front Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the oil pan skid plate, if equipped.
4. Remove the stabilizer shaft insulator bracket bolts (3).
5. Remove the stabilizer shaft bracket (2).
6. Lower the stabilizer bar to remove the stabilizer shaft insulators (1).
7. Inspect all of the parts for wear and damage.
Installation Procedure
1. Install the stabilizer shaft insulators (1) to the stabilizer shaft (4).
Important:
Place the insulators on the stabilizer shaft with the slits facing toward the front of the vehicle.
2. Install the stabilizer shaft (4) brackets (2) over the insulators.
3. Install stabilizer shaft insulator bracket bolts (3).
