Silverado 1500 4WD V8-5.3L VIN B HO (2006)
34. Install the solenoid O-ring (6) onto the TCC PCS (7).
Important:
^
P/N 29541898 is printed on the torque converter clutch pressure control solenoid (TCC PCS).
^
The solenoid O-rings are green.
^
O-ring (6) is slightly larger than O-ring (5).
35. Install the solenoid O-ring (5) onto the TCC PCS (7).
36. Install the TCC PCS spring (3).
37. Install the TCC PCS valve (4)
38. Align the TCC PCS (7) so that the electrical connection faces up.
39. Install the TCC PCS. Seat the solenoid.
40. Align the PCS retaining bracket (2) with the main valve body locating pin.
41. Install the PCS retaining bracket (2) so that the TCC PCS is against the valve body.
42. Install the bolt (1) retaining the PCS retaining bracket (2).
^
Tighten the bolt to 12 Nm (108 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
