Silverado 1500 4WD V8-5.3L VIN B HO (2006)
1. Install the control lever assembly.
2. Install the control lever bolts.
^
Tighten the bolts to 12 Nm (106 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the control lever bezel.
4. Install the control lever bezel screws.
^
Tighten the screws to 2 Nm (18 inch lbs.).
5. Install the control lever knob.
6. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
7. Install the shift control rod.
8. Install the front propeller shaft.
9. Install the transfer case shield, if equipped.
