Silverado 1500 4WD V8-5.3L VIN T (2004)
Pedal Positioning Switch: Service and Repair
Brake Pedal Position Sensor Replacement
Removal Procedure
1. Important:
Once the Brake Pedal Position Sensor bolt is removed for any reason, a new 4 mm bolt, with fresh LOCTITETM will need to be installed.
Remove the brake pedal position sensor bolt (1).
2. Remove the brake pedal position sensor (2) from the mounting bracket.
3. Disconnect the brake pedal position sensor electrical connector (1).
4. Remove the brake pedal position sensor (2) from the vehicle
Installation Procedure
