Silverado 1500 4WD V8-5.3L VIN T (2004)
1. Position the left engine mount to the engine.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the engine mount bolts.
^
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the front propeller shaft.
6. Position the engine shield to the vehicle.
7. Install the engine shield bolts.
^
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
8. Lower the vehicle.
9. Install the engine mount-to-engine mount bracket bolts. (Right side shown, left side similar).