Silverado 1500 4WD V8-5.3L VIN T (2004)
4. Remove the EVAP canister purge solenoid bolt (2).
5. Remove the EVAP canister purge solenoid (3) and insulator (1).
INSTALLATION PROCEDURE
1. Install the insulator (1) onto the EVAP canister purge solenoid (3).
2. Install the EVAP canister purge solenoid (3).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the EVAP canister purge solenoid bolt (2).
Tighten
Tighten the bolt to 10.5 N.m (93 lb in).
