Silverado 1500 4WD V8-5.3L VIN T (2004)
22. If vehicle is a regular cab, remove the fuel feed, EVAP, and return pipe assembly nuts.
23. If vehicle is a crew or extended cab, remove the fuel feed, EVAP, and return pipe assembly nuts.
24. Remove the fuel feed, EVAP, and return pipe assembly.
INSTALLATION PROCEDURE
1. Install the fuel feed, EVAP, and return pipe assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. If vehicle is a crew or extended cab, install the fuel feed, EVAP, and return pipe assembly nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
