Silverado 1500 4WD V8-5.3L VIN Z Flex Fuel (2005)
4. Install the center console duct.
5. Install the screws to the center console duct.
Tighten the screws to 1.6 N.m (14 lb in).
6. Install the center console.
7. Install the floor air outlet duct extension (1) to the floor air duct (2).
Mode Actuator (Without RPO Code D07)
MODE ACTUATOR REPLACEMENT (WITHOUT D07)
REMOVAL PROCEDURE
1. Remove the floor air outlet duct extension (1) from the floor duct (2).
2. Disconnect the electrical connection at the mode actuator (10).
3. Remove the mode actuator mounting screws from the HVAC module.
4. Remove the mode actuator as an assembly with the actuator cam.
INSTALLATION PROCEDURE
