Silverado 1500 4WD V8-6.0L (2010)
-
A wrench will be needed to install the antenna mast. When starting to thread the antenna mast onto the base stud, interference will be felt. The
interference is similar to the feeling of a cross threaded fastener.
Important
Use a protective tape or a cloth inside an adjustable wrench when installing the antenna mast. This will help prevent damage to the
painted coating on the antenna mast.
-
Tighten the antenna mast.
Tighten
Tighten to 6 Nm (53 lb in).
Parts Information
Disclaimer
