Silverado 1500 4WD V8-6.0L (2010)
1. Align the weatherstrip to the door opening with the 2 dots positioned on the upper right and left side.
2. Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening.
3. Install the weatherstrip to the pinch-weld flange. Ensure that the weatherstrip is fully seated.
4. Install the rear door sill plate. Refer to Rear Side Door Sill Trim Plate Replacement (Crew Cab) (See: Interior Moulding / Trim/Scuff
Plate/Service and Repair/Rear Side Door Sill Trim Plate Replacement (Crew Cab))Rear Side Door Sill Trim Plate Replacement (Extended Cab) (
See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Side Door Sill Trim Plate Replacement (Extended Cab)).
Rear Side Door Bottom Auxiliary Sealing Strip Replacement (Crew Cab)
Rear Side Door Bottom Auxiliary Sealing Strip Replacement (Crew Cab)
Rear Side Door Bottom Auxiliary Sealing Strip Replacement (Extended Cab)
Rear Side Door Bottom Auxiliary Sealing Strip Replacement (Extended Cab)
