Silverado 1500 4WD V8-6.0L (2010)
Positive: Service and Repair
Battery Positive Cable Replacement (Control Module to Auxiliary BEC)
Battery Positive Cable Replacement (Control Module to Auxiliary BEC)
Removal Procedure
1. Disable the high voltage system. Refer to High Voltage Disabling ().
2. Remove the auxiliary bussed electrical center (BEC) cover (1).
3. Remove the positive battery cable nut (1) from the mega fuse stud.
4. Remove the positive battery cable lead (5) from the mega fuse stud.
5. Remove the engine shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
Replacement).
6. Remove the positive battery cable clips (2, 3, and 4) from the frame crossmember.