Silverado 1500 4WD V8-6.0L (2010)
3. Install the steward clamp ferrite bead on the wire harness (1).
4. Place tape around the steward clamp ferrite bead (1) to avoid vibration or movement. Verify that the door glass does not come in contact with it.
5. Reinstall the door trim. Refer to SI door trim removal.
6. Reconnect the battery. Refer to SIR Disabling and Enabling in SI.
Parts Information
Parts (Laird HFA100049-0A2) can be purchased from Digi-Key Corporation at www.digikey.com.
Material allowance for repair is $1.10 each (in Canada, $1.21).
Warranty Information
For vehicle repaired under warranty, use the table.
Disclaimer
