Silverado 1500 4WD V8-6.0L (2010)
Pitman Arm: Service and Repair
Pitman Arm Replacement
Special Tools
*
J 6632-01 Pitman Arm Puller
*
J 29107-A Pitman Arm Puller
Removal Procedure
1. Remove the steering gear. Refer to Steering Gear Replacement (Hydraulic Rack and Pinion) (See: Steering Gear)Steering Gear Replacement
(Recirculating Ball Without LMM) (See: Steering Gear)Steering Gear Replacement (HP2) (See: Steering Gear)Steering Gear Replacement
(LMM) (See: Steering Gear).
2. Place the steering gear into a vise.
3. Remove the pitman arm nut (1) and washer (2).
4. Remove the pitman arm from the pitman arm shaft using puller J 6632-01 or puller J 29107-A .
Installation Procedure
1. Install the pitman arm onto the steering gear.