Silverado 1500 4WD V8-6.0L Hybrid (2009)
6. Remove the screw (1) from regulator (2).
7. Remove the regulator (2) from the motor/module.
Note
When removing the tension from the cables, depress and hold spring on the regulator to remove tension from the cable before releasing the pulley from
the frame. Once the pulley has been released, the spring can then be released.
8. Remove the pulley (1) from the frame.
1. Lift the end of the tabs (2) out of the window frame (3).
2. Turn upward to release the pulley (1) from the frame (3).