Silverado 1500 4WD V8-6.0L Hybrid (2009)
8. Connect the brake master cylinder primary brake pipe fitting (1).
Tighten the fitting to 30 Nm (22 lb ft).
9. Connect the brake master cylinder reservoir return hose quick connect (1).
10. Connect the brake master cylinder reservoir supply hose quick connect (2).
11. Connect the brake fluid level sensor electrical connector.
12. Fill the brake master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (Non-Hybrid) (See: Procedures/Master Cylinder Replacement
(RHD))Master Cylinder Reservoir Filling (Two-mode Hybrid) (See: Procedures/Master Cylinder Replacement (Vacuum Boost)) .
13. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair)Hydraulic Brake System Bleeding (Two-mode Hybrid) (See:
Power Brake Assist/Hydraulic Fluid Accumulator/Service and Repair/Removal and Replacement/Hydraulic Brake Booster Accumulator
Replacement) .
Master Cylinder Replacement (ABS)
