chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Brakes - Feel Grabby or Touchy DTC C012E Reprogramming|Page 11408 > < Brakes - Feel Grabby or Touchy DTC C012E Reprogramming|Page 11406

Silverado 1500 4WD V8-6.0L Hybrid (2009)

Page 3
background image

6. Remove all dirt and debris from the electronic brake control module (EBCM) and the brake pressure modulator valve (BPMV).
7. Disconnect the EBCM electrical connector.
8. Loosen, but do not remove, the EBCM bolts (1).

Note

Do not pry the EBCM from the BPMV. The EBCM must be pulled away from the BPMV evenly.

9. Using the loosened EBCM bolts as a guide, carefully pull the EBCM (1) evenly away from the BPMV to release the electrical connectors.

Brakes - Feel Grabby or Touchy DTC C012E Reprogramming|Page 11408 > < Brakes - Feel Grabby or Touchy DTC C012E Reprogramming|Page 11406