Silverado 1500 4WD V8-6.0L Hybrid (2009)
1. Place the service gasket (1) onto the valve lifter oil manifold.
2. Install the valve lifter oil manifold (1) to the engine.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
3. Install the valve lifter oil manifold bolts (2).
Tighten the bolts to 25 Nm (18 lb ft).
4. Connect the engine harness electrical connector (1) to the oil pressure sensor.
5. Install the intake manifold. Refer to Intake Manifold Replacement (See: Intake Manifold/Service and Repair) .
