chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Idler Pulley > < Engine Mount and Bracket Replacement - Left|Page 3701
Page 5
background image

Tighten the bolts to 90 Nm (67 lb ft).

8. If the vehicle is equipped with 4WD, Install the front drive axle. Refer to Differential Carrier Assembly Replacement (1500 FWD)   (See:

Transmission and Drivetrain/Differential Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Differential Carrier Assembly
Replacement)Differential Carrier Assembly Replacement (2500 4WD),  See: Transmission and Drivetrain/Differential Assembly/Service and
Repair/Removal and Replacement

9. Install the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (4.8L, 5.3L, 6.0L, and 6.2L)   (See: Exhaust System/Exhaust

Manifold/Service and Repair)Exhaust Manifold Replacement - Right Side (6.6L)   (See: Exhaust System/Exhaust Manifold/Service and Repair
)Exhaust Manifold Replacement - Right Side (4.3L)   (See: Exhaust System/Exhaust Manifold/Service and Repair) .

Idler Pulley > < Engine Mount and Bracket Replacement - Left|Page 3701