Silverado 1500 4WD V8-6.0L Hybrid (2009)
15. Tighten the CMP actuator solenoid valve.
1. Tighten the bolt a first pass to 65 Nm (48 lb ft).
2. Tighten the bolt a final pass an additional 90 degrees using J 45059 .
16. Remove the J 42386-A (1) and bolts.
17. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (See: Engine Lubrication/Oil Pump/Service and
Repair) .
