Silverado 1500 4WD V8-6.0L Hybrid (2009)
Cabin Temperature Sensor / Switch: Service and Repair
Inside Air Temperature Sensor Replacement
Removal Procedure
1. Remove the left windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement (See: Body and Frame/Interior Moulding
/ Trim/Trim Panel/Service and Repair) .
2. Remove the left center pillar assist handle. Refer to Roof Rail Rear Assist Handle Replacement (See: Body and Frame/Interior Moulding /
Trim/Passenger Assist Handle/Service and Repair) .
3. Remove the center pillar garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) .
4. Remove the left sunshade. Refer to Sunshade Replacement (See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair) .
5. Gently pull down the headliner.
6. Disconnect the electrical connector from the inside air temperature sensor.
7. Partially remove the inside air temperature sensor from the headliner.
8. Remove the sensor grille from the inside air temperature sensor.
9. Remove the inside air temperature sensor from the headliner.
Installation Procedure
1. Install the new sensor grille to the headliner.
2. Install the inside air temperature sensor to the headliner and sensor grille.