Silverado 1500 4WD V8-6.0L Hybrid (2009)
Caution: Always remove and install the High Voltage terminal fasteners with a magnet tipped socket. Never touch the exposed electronic circuit
board surface or components. Dropped fasteners or physical contact may result in electronic circuit board damage.
9. Remove the HV dc electric air conditioning compressor module (ACCM) cable terminal fasteners (1).
10. Remove the HV dc electric ACCM cable mounting fasteners (3).
11. Remove the HV dc electric ACCM cable (4) from the PIM distribution box.
12. Remove the HV dc battery cable terminal fasteners (2).
13. Remove the HV dc battery cable mounting fasteners (5).
14. Remove the HV dc battery cable (6) from the PIM distribution box.
15. Inspect and retain the seals (7).
16. Remove the drive motor generator position sensor shield circuit fastener (2).
17. Remove the shield circuit harness (1).
18. Remove the PIM cooling inlet (4) and outlet (5) hoses.
19. Cap the coolant pipes (3, 6) to prevent coolant spillage when lifting the drive motor generator control module assembly from the vehicle.
