chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Fuel Pressure Relief (With CH-48027)|Page 2285 > < Fuel Pressure Relief (With CH-48027)|Page 2283

Silverado 1500 4WD V8-6.0L Hybrid (2009)

Page 2
background image

Note

If relieving the fuel pressure for the fuel pressure gage installation and removal, it is NOT necessary to proceed with the following steps.

12. Disconnect the CH-48027-2 (2) from the CH-48027-3 (4).
13. Disconnect the CH-48027-3 (4) from the fuel rail service port.
14. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
15. Install the fuel rail service port cap.
16. Install the engine cover, if required.
17. Tighten the fuel fill cap.

Fuel Pressure Relief (With CH-48027)|Page 2285 > < Fuel Pressure Relief (With CH-48027)|Page 2283