Silverado 1500 4WD V8-6.0L Hybrid (2009)
7. Install the starter solenoid cable terminal (2) to the fuse stud.
8. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm (11 lb ft).
9. Install the mega fuse cover.
10. Connect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (With Single Battery) (See: Starting
and Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (With Auxiliary Battery) (See:
Starting and Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (With Dual Batteries) (
See: Starting and Charging/Battery/Battery Cable/Service and Repair) .
175 Amp Mega Fuse Replacement (With Single Battery)
175 Amp Mega Fuse Replacement (With Single Battery)
Removal Procedure
